Source: Original content on this website Click:190 Time:2024-6-1
The knowledge of daily maintenance of clothing assembly lines can be summarized as follows:
1、 Equipment cleaning
1. Use blowing tools: Regularly use blowing tools to blow clean the floor, equipment surface, and corners of the assembly line, including any lint, garbage, etc. on the ground.
2. Wiping equipment: Use a cloth to wipe the lamp stick, suspended bracket, workshop glass, etc. to ensure good hygiene in the workshop.
2、 Equipment lubrication
1. Chain and bearing lubrication: The chains on the flowing equipment, the bearings on the head and tail drums, and the load-bearing small drums on the surface need to be lubricated with lubricating oil or machine oil from time to time to prevent abnormal sounds when there is a shortage of oil, which can cause damage in the long run.
3、 Equipment protection
1. Waterproof and moisture-proof: The frequency converter, motor, etc. should not be exposed to water. If not in use for a long time, the environment should be kept dry to avoid short circuits and burns.
2. Avoid deformation: Under normal circumstances, the assembly line should maintain straightness to avoid pushing and bending deformation, so as not to cause belt running.
3. Avoid damaging the belt: When using cutting tools or sharp tools during work, be careful to avoid damaging the belt.
4. Correct operation: If the assembly line equipment does not have a forward and reverse function, it is best not to design a reverse function for the frequency converter. Its function can be locked to prevent belt reversal from causing friction and damage during running.
4、 Equipment inspection
1. Check engine oil: The gearbox should periodically check whether the internal engine oil is sufficient. Observe from the small circular window on the outside. If there is a lack of engine oil or insufficient engine oil, it should be added in a timely manner. Long term operation without oil can cause gear polishing and damage.
2. Equipment shutdown: When the assembly line is shut down, it is best to adjust the frequency converter to zero to avoid unnecessary losses caused by items on the belt during startup.
5、 Environmental maintenance
3. Use appropriate disinfectants: Based on the characteristics and requirements of clothing production, choose appropriate disinfectants for regular disinfection to ensure the hygiene condition of the production line.
4. Ventilation and drying: After disinfection is completed, the ventilation equipment should be turned on in a timely manner to promote rapid drying of the production line and ensure that there is no disinfectant residue on the equipment and fabric.
6、 Personnel management
1. Standardized operation: Ensure that all staff members understand and comply with anti-static work regulations, and form a culture and habit of anti-static work.
Through the above measures, it is possible to effectively maintain the good operation status of the clothing assembly line, extend the service life of the equipment, and improve production efficiency.
Contact person: Mr. Zhang / 136 5032 7658
Contact person: Mr. Wu / 180 2707 8328
Contact person: Mr. Cui / 181 2430 7651
Email: 2258967638@qq.com
Telephone: 0769-89917876
Address: No.8, Xixing 4th Road, beizhaxifang Industrial Zone, Humen Town, Dongguan City