Source: Original content on this website Click:151 Time:2024-5-29
The debugging of the hanging clothing assembly line is a key step, and the following is a clear debugging step, combined with the relevant information in the reference article:
1. Determine the direction of forward and reverse rotation
Determine direction: Firstly, determine the forward direction (from left to right) and reverse direction (from right to left) of the assembly line according to production needs.
Verify correctness:
Disconnect the power supply to ensure safety.
Open the motor protection cover and locate the motor wiring terminals.
Invert the positive and negative poles of the motor (i.e. connect the wire originally connected to the positive pole to the negative pole, and connect the wire originally connected to the negative pole to the positive pole).
Reinstall the motor protective cover and reconnect the power for testing.
2. Adjust the water flow speed
Speed range: The speed of the hanging clothing assembly line is usually between 1-6 meters per minute.
Using tools:
Manual speed controller: suitable for small production lines, controlling the speed through a manual knob.
Electronic speed controller: suitable for large-scale production lines, capable of automatically adjusting the speed, and can preset multiple sets of speed parameters.
Specific adjustment: Select the appropriate rotational speed for adjustment based on clothing style and production needs.
3. Adjust hanger settings
Height and spacing:
The height of the hanger is usually set at around 1.2 meters above the ground, depending on the operator’s height and job responsibilities.
The distance between adjacent hangers is generally between 50-80 centimeters to ensure smooth operation by the operator.
Horizontal and Vertical: Use a spirit level to check the horizontal and vertical status of the clothes rack, ensuring that the clothes do not tilt or slip during transportation.
Angle adjustment: Adjust the hanger angle appropriately according to the weight of the clothes (such as tilting the bottom inward 5-10 degrees) to ensure that the clothes are transported horizontally.
4. Adjustment of working components
Disassembly and cleaning: Disassemble and clean all components of the assembly line to ensure that there are no impurities affecting operation.
Inspection and maintenance: Check for any damage or defects in the components and promptly repair or replace them.
Position and tightness: Adjust the position of components according to production requirements and ensure moderate tightness to ensure smooth operation of the assembly line.
5. Precautions
Safe operation: During the debugging process, follow the safety operating procedures to ensure the safety of personnel and equipment.
Regular inspection: After debugging is completed, regularly check the operation status of the assembly line to ensure long-term stable operation.
Maintenance: Regularly maintain the water flow line to extend the service life of the equipment.
By debugging the above steps and following the precautions, the efficient and safe operation of the hanging clothing assembly line can be ensured.
Contact person: Mr. Zhang / 136 5032 7658
Contact person: Mr. Wu / 180 2707 8328
Contact person: Mr. Cui / 181 2430 7651
Email: 2258967638@qq.com
Telephone: 0769-89917876
Address: No.8, Xixing 4th Road, beizhaxifang Industrial Zone, Humen Town, Dongguan City